Hello Guest it is August 06, 2020, 09:06:04 PM

Author Topic: Toolpath Screen  (Read 2919 times)

0 Members and 1 Guest are viewing this topic.

Toolpath Screen
« on: July 16, 2006, 12:10:28 AM »
Hi,

I have recently downloaded version 1.090.064 onto my computer, can anyone tell me why my toolpath screen looks like the attached file.


Kind Regards

Bill S.

Hood

*
Re: Toolpath Screen
« Reply #1 on: July 16, 2006, 03:24:01 AM »
Not 100% sure but it looks like a problem I had a while back. Look under config menu then state and try setting Distance Mode to Absolute and IJ Mode to Inc.
Hope it helps
Hood

Offline John S

*
  •  111 111
  • Nottingham England
    • View Profile
Re: Toolpath Screen
« Reply #2 on: July 16, 2006, 06:22:53 AM »
Nearly right.
It's not the distance but the Arc's that want swapping over form Abs to INc or the other way depending on what they are now.
Very common problem.

John S.
Re: Toolpath Screen
« Reply #3 on: July 16, 2006, 07:55:35 AM »
Thanks John S and Hood,

Worked a treat.   ;D