Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Bill s on July 16, 2006, 12:10:28 AM
-
Hi,
I have recently downloaded version 1.090.064 onto my computer, can anyone tell me why my toolpath screen looks like the attached file.
Kind Regards
Bill S.
-
Not 100% sure but it looks like a problem I had a while back. Look under config menu then state and try setting Distance Mode to Absolute and IJ Mode to Inc.
Hope it helps
Hood
-
Nearly right.
It's not the distance but the Arc's that want swapping over form Abs to INc or the other way depending on what they are now.
Very common problem.
John S.
-
Thanks John S and Hood,
Worked a treat. ;D