Hello Guest it is June 16, 2025, 07:39:01 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: LINE 0: NO SPINDLE SPEED SET IN G95 MODE  (Read 2769 times)

0 Members and 1 Guest are viewing this topic.

Offline canewb

*
  • 2 2
LINE 0: NO SPINDLE SPEED SET IN G95 MODE
« on: October 09, 2021, 06:38:39 PM »
Why do I get this error when I do not control the spindle with Mach4 ?
And, I do not see a G95 entry in the .TAP file
Logged

Offline thosj

*
  • 540 540
Re: LINE 0: NO SPINDLE SPEED SET IN G95 MODE
« Reply #1 on: October 13, 2021, 06:43:28 PM »
Just for curiosities sake, change S 24000 to S24000.

G95 is Feed per revolution mode. usually used on lathes. You likely aren't using feed per revolution with feeds of F50.0 and F20.0 at 24000 RPM's!!
« Last Edit: October 13, 2021, 06:48:16 PM by thosj »
Logged
--
Tom
Pages: 1   Go Up
« previous next »