Hello Guest it is May 22, 2025, 12:22:03 AM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Mach3 Z-Axis decreases with subsequent iterations  (Read 10874 times)

0 Members and 1 Guest are viewing this topic.

Offline roadkingcustom04

*
  • 2 2
Mach3 Z-Axis decreases with subsequent iterations
« on: March 23, 2021, 06:46:14 PM »
Mach 3 Z-Axis decreases in cut value with subsequent cuts in same program and does not return to zero height when complete.  Each cut subsequent progressively gets lower in the work.
Logged

Offline roadkingcustom04

*
  • 2 2
Re: Mach3 Z-Axis decreases with subsequent iterations
« Reply #1 on: March 24, 2021, 12:17:02 AM »
fixed problem by tightening the other two set screws that were missed.  4 set screws total on coupler. :o
Logged
Pages: 1   Go Up
« previous next »