Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: roadkingcustom04 on March 23, 2021, 06:46:14 PM

Title: Mach3 Z-Axis decreases with subsequent iterations
Post by: roadkingcustom04 on March 23, 2021, 06:46:14 PM
Mach 3 Z-Axis decreases in cut value with subsequent cuts in same program and does not return to zero height when complete.  Each cut subsequent progressively gets lower in the work.
Title: Re: Mach3 Z-Axis decreases with subsequent iterations
Post by: roadkingcustom04 on March 24, 2021, 12:17:02 AM
fixed problem by tightening the other two set screws that were missed.  4 set screws total on coupler. :o