Hello Guest it is March 05, 2026, 11:19:36 AM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: shape doesnt come out exactly as designed  (Read 17423 times)

0 Members and 1 Guest are viewing this topic.

Offline franselferink

*
  • 8 8
shape doesnt come out exactly as designed
« on: June 25, 2019, 05:46:27 AM »
the router accuracy  looks like this (see picture). I dont have used cutter compensation.  I use a 0.6mm router bit. As far as I know just follow the line (very basic).It turns out dramtically bad.
« Last Edit: June 25, 2019, 07:14:20 AM by Tweakie.CNC »
Logged

Offline TPS

*
  • 2,623 2,623
Re: shape doesnt come out exactly as designed
« Reply #1 on: June 26, 2019, 04:20:28 AM »
Looks like backslash in X/Y axis
Logged
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline franselferink

*
  • 8 8
Re: shape doesnt come out exactly as designed
« Reply #2 on: June 26, 2019, 12:09:43 PM »
Quote from: TPS on June 26, 2019, 04:20:28 AM
Looks like backslash in X/Y axis



I have solved it, it was backslash in the y direction, the coupling to the steppermotor wasnt tight and could move about 1mm
Logged
Pages: 1   Go Up
« previous next »