Hello Guest it is June 15, 2025, 10:51:24 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Mach4 Tangential  (Read 3885 times)

0 Members and 1 Guest are viewing this topic.

Offline J.Hunter

*
  • 16 16
Mach4 Tangential
« on: August 13, 2016, 08:44:58 AM »
1) Does it work?
2) If it does work, does Constant Velocity work in tangential mode?
3) If (1) and (2) are true, does it work through SmoothStepper?

Currently using Mach3 v3.043.022 - tangential fails in any version newer than that.
Logged

Offline smurph

*
  • *
  • 1,574 1,574
  • "That there... that's an RV."
Re: Mach4 Tangential
« Reply #1 on: August 17, 2016, 11:57:29 PM »
Brian is working on the tangential stuff right now.  CV is working.  I don't know the status of the rest of it.  But it may do what you need.  Try it out and see.  It should work with Ethernet Smooth Stepper fine.  Or any other motion device that Mach 4 supports.

Steve
Logged
Pages: 1   Go Up
« previous next »