Hello Guest it is May 22, 2025, 02:23:05 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: roughing job away from workpiece, finishing job is fine  (Read 14786 times)

0 Members and 1 Guest are viewing this topic.

Offline Spades

*
  • 1 1
roughing job away from workpiece, finishing job is fine
« on: September 07, 2013, 12:23:49 PM »
Hello,

I have a problem. The roughing job cuts far away from the workpiece. The finishing job cuts right.

In lazycam everything looks fine, but after loading the file in Mach3mill it looks strange.

The G-Code is wrong, so it must be a problem with lazyturn...

Please help me.  :)

Logged

Offline mohamedhelmi

*
  • 14 14
Re: roughing job away from workpiece, finishing job is fine
« Reply #1 on: November 15, 2013, 01:05:17 AM »
hi,
I encountered the same problem. did get the solution ? ???
Logged

Offline RICH

*
  • *
  • 7,427 7,427
Re: roughing job away from workpiece, finishing job is fine
« Reply #2 on: November 15, 2013, 05:01:36 AM »
MOHAMEDHELMI,
Have you read the Lazyturn Manual?

RICH
Logged

Offline mohamedhelmi

*
  • 14 14
Re: roughing job away from workpiece, finishing job is fine
« Reply #3 on: November 15, 2013, 04:37:10 PM »
yes I finish reading it
but may be I messd some details .
Logged
Pages: 1   Go Up
« previous next »