Hello Guest it is June 15, 2025, 04:21:06 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Pokeys56 Pulse Engine and 4th Axis  (Read 9599 times)

0 Members and 1 Guest are viewing this topic.

Offline g8kmh

*
  • 3 3
Pokeys56 Pulse Engine and 4th Axis
« on: November 12, 2012, 05:48:41 PM »
If using the Pulse Engine for X, Y, Z, are there any recommended pins for step/dir for the A Axis?

Will an MPG drive the A axis via Mach3, bypassing the Pulse Engine on that axis?

Regards,
Lehane


Logged

Offline NeoTO

*
  • 504 504
    • PoLabs
Re: Pokeys56 Pulse Engine and 4th Axis
« Reply #1 on: November 15, 2012, 04:39:03 AM »
Hi, Lehane

PoKeys supports only 3-axes at the moment and you can not assign additional pins for 'A' axis. The solution (pulse engine upgrade) is coming soon.
Logged
www.poscope.com home of PoKeys USB HID, IO, USB, Ethernet controler and PoScope USB PC oscilloscope

Offline g8kmh

*
  • 3 3
Re: Pokeys56 Pulse Engine and 4th Axis
« Reply #2 on: November 15, 2012, 05:39:11 PM »
OK,
I'll look forward to that and leave the A axis until later. Let me know if you want an beta tester.

Regards,
Lehane
Logged
Pages: 1   Go Up
« previous next »