Hello Guest it is April 30, 2025, 05:31:26 AM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: which Galil bds work with Mach?  (Read 13662 times)

0 Members and 1 Guest are viewing this topic.

Offline wddanie

*
  • 4 4
which Galil bds work with Mach?
« on: March 18, 2007, 09:34:17 PM »
Will a Galil DMC-1040 (ISA card) work with the Galil mach plugin?

From what I read, only the 18xx and 2********* series are covered. Is that right?

Thanks,

Doug Danielson
Atlanta, GA
Logged

Offline greg

*
  • 66 66
Re: which Galil bds work with Mach?
« Reply #1 on: March 22, 2007, 11:50:45 PM »
there were  3 or 4 of us asking the same ?.it must have gotten lost changing over to the new servers. any info would be appreciated. thanks greg
Logged

Offline ger21

*
  • *
  • 6,295 6,295
    • The CNC Woodworker
Re: which Galil bds work with Mach?
« Reply #2 on: March 23, 2007, 08:54:29 PM »
From what I recall reading in the past, only the PCI cards are fast enough. Brian can answer better, though.
Logged
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline Brian Barker

*
  • *
  • 3,860 3,860
Re: which Galil bds work with Mach?
« Reply #3 on: March 23, 2007, 09:52:22 PM »
PCI and the Ethernet versions are tested to work...
Logged
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com

Offline Dan Mauch

*
  • 44 44
Re: which Galil bds work with Mach?
« Reply #4 on: April 16, 2007, 03:34:48 PM »
Brian I acquired a Galil 1842 PCI card and the interconnect breakout board. But it came with no instructions. I want it to work with mach3. So I know I need the Galil plugin for mach3. So I take it that I will need the driver for the board from Galil and then after the board is installed let windows locate the board and the driver. Is that all there is to it?
Logged
Pages: 1   Go Up
« previous next »