Hello Guest it is February 03, 2026, 12:42:34 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Mach2 part resizing  (Read 8950 times)

0 Members and 1 Guest are viewing this topic.

Offline wss

*
  • 3 3
Mach2 part resizing
« on: March 10, 2008, 02:32:47 PM »
I have been using Mach2 for a few years now with a very personal item - I have had very good results.

I have a need to resize a current part but do not want to go through the CAM process again to resize it.

Any suggestions?

Thanks

Logged

Offline wss

*
  • 3 3
Re: Mach2 part resizing
« Reply #1 on: March 10, 2008, 02:36:43 PM »
Excuse me - CAD process.

Logged

Offline Hood

*
  • 25,835 25,835
  • Carnoustie, Scotland
Re: Mach2 part resizing
« Reply #2 on: March 10, 2008, 03:17:28 PM »
You can scale each axis in Mach, so if you want to make the part double the sizeput 2 in each scale DRO, if you want to reduce it by half then put 0.5 in them.
Hood
Logged

Offline wss

*
  • 3 3
Re: Mach2 part resizing
« Reply #3 on: March 10, 2008, 03:19:08 PM »
Great -- thanks.

Logged
Pages: 1   Go Up
« previous next »