Hello Guest it is May 09, 2025, 12:28:29 AM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: m06 end  (Read 3824 times)

0 Members and 1 Guest are viewing this topic.

Offline comet

*
  • 338 338
m06 end
« on: February 13, 2013, 04:12:32 PM »
what does m06 end do? is this where i should put the g43? i have an atc on my machine
Logged

Offline ger21

*
  • *
  • 6,295 6,295
    • The CNC Woodworker
Re: m06 end
« Reply #1 on: February 13, 2013, 07:38:58 PM »
M6End is not used with an ATC.
When Mach3 is configured for M6 to "Stop Spindle, Wait for Cycle Start", M6Start runs when the M6 is called, and M6End runs after Cycle Start is pushed.

When Mach3 is configured for ATC, then only M6Start runs.
Logged
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Pages: 1   Go Up
« previous next »