rotate the toolpath display

[Fred_evans]

Hello All

The manual says that i can rotate the toolpath display.
I can get it to zoom and i can get it to pan-

but how do i get it to rotate.

[ger21]

Left click and drag in it. Hold down the left mouse button while dragging

[Fred_evans]

I am trying-- but it just gets bigger or smaller ( no rotating)

sorry

fred

[BR549]

Normal mouse assignments are

Left  >>>   Oribital pan (rotate)

Center >>  ZOOM

Right   >> XY pan

Yours may be different . Try the other buttons one at a time.

(;-) TP

[Fred_evans]

sorry still doesnt rotate??
will have to work without it
best regards and thanks

[Hood]

Rotate was even present way back in Mach2 days so why you cant get it I dont know unless it is Turn you are trying to do it in?
Hood

[Fred_evans]

I am using mach3 turn

regards fred

[Hood]

There is no rotate in Turn, no need as you see all from a profile in Turn, well thats if it displays correctly
.
Hood

[Fred_evans]

thanks Hood -
Just needed to get a bit more comfortable with mach3 turn - so thats why i am only coming back to this now

I have found that the difference is that my left bouse button and the wheel do the same thing

could you tell me where and how to configure these buttons.

(  If its complicated and a lot of typeing if you would just point me to the section in the manual
and i will read it up myself)
regards fred

[Hood]

Its not complicated or a lot of typing they are not configurable and Left mouse/drag does the same as scroll wheel  in Turn.
Hood