Hello Guest it is October 01, 2023, 06:40:13 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Can Mach3 run under windows CE  (Read 8772 times)

0 Members and 1 Guest are viewing this topic.

Offline Cncman2nv

*
  • 90 90
    • View Profile
Can Mach3 run under windows CE
« on: January 01, 2009, 08:26:45 PM »
   
 Does anyone know if mach can run under windows CE
Logged
Adam

Offline edvaness

*
  • 506 506
    • View Profile
Re: Can Mach3 run under windows CE
« Reply #1 on: January 01, 2009, 10:54:09 PM »
cncman,

Windows CE is a distinctly different operating system and kernel, rather than a trimmed-down version of desktop Windows. It is not to be confused with Windows XP , so I would say don't bother. I would stick to win 2000 , or XP.

Ed
Logged
Ed VanEss

Offline edvaness

*
  • 506 506
    • View Profile
Re: Can Mach3 run under windows CE
« Reply #2 on: January 01, 2009, 11:04:53 PM »
 
cncman

you can pickup used towers with xp pretty cheap now, and with a 1g processor and 512mb ram is all you need. ;)

Ed
Logged
Ed VanEss

Offline vlmarshall

*
  • 23 23
  • G28 G91 X0 Y0
    • View Profile
Re: Can Mach3 run under windows CE
« Reply #3 on: January 01, 2009, 11:26:35 PM »
...but a handheld Mach would be fun.
Logged

Offline poppabear

*
  • *
  • 2,235 2,235
  • Briceville, TN, USA
    • View Profile
Re: Can Mach3 run under windows CE
« Reply #4 on: January 02, 2009, 09:37:57 PM »
Brain says you can run CE, IF you are running an external Motion board, and have the ".net" stuff installed.

scott
Logged
fun times

Offline budman68

*
  • *
  • 2,352 2,352
    • View Profile
Re: Can Mach3 run under windows CE
« Reply #5 on: January 02, 2009, 11:22:23 PM »
Here's a pic from the yahoo board that has Mach 2 on a PDA but I've never seen any ifo about it.

Anyone know?

Dave
Logged
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)

Offline budman68

*
  • *
  • 2,352 2,352
    • View Profile
Re: Can Mach3 run under windows CE
« Reply #6 on: January 02, 2009, 11:33:42 PM »
Funny, I just looked through the board over there and it was actually used as a wireless controller/pendant.

The software was not running Mach 2 itself.

Dave
Logged
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)
Pages: 1   Go Up
« previous next »