Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Cncman2nv on January 01, 2009, 08:26:45 PM
-
Does anyone know if mach can run under windows CE
-
cncman,
Windows CE is a distinctly different operating system and kernel, rather than a trimmed-down version of desktop Windows. It is not to be confused with Windows XP , so I would say don't bother. I would stick to win 2000 , or XP.
Ed
-
cncman
you can pickup used towers with xp pretty cheap now, and with a 1g processor and 512mb ram is all you need. ;)
Ed
-
...but a handheld Mach would be fun.
-
Brain says you can run CE, IF you are running an external Motion board, and have the ".net" stuff installed.
scott
-
Here's a pic from the yahoo board that has Mach 2 on a PDA but I've never seen any ifo about it.
Anyone know?
Dave
-
Funny, I just looked through the board over there and it was actually used as a wireless controller/pendant.
The software was not running Mach 2 itself.
Dave