Hello Guest it is April 19, 2024, 03:23:06 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Rotary table makes erratic direction changes...  (Read 2764 times)

0 Members and 1 Guest are viewing this topic.

Offline Jon_sparky

*
  • 2 2
    • View Profile
Rotary table makes erratic direction changes...
« on: July 08, 2006, 09:54:08 PM »
Hi all,
I have a sherline 4" rotary table that I am running on Mach 3. If I jog  forward twice it will reverse directions on me. Is this some setting I have wrong or is the motor wired wrong?
Jon
Logged

Offline Brian Barker

*
  • *
  • 3,859 3,859
    • View Profile
Re: Rotary table makes erratic direction changes...
« Reply #1 on: July 08, 2006, 10:16:30 PM »
I think you have one coil that is not getting power :(  Check your wires to the stepper motor
Logged
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com

Offline Jon_sparky

*
  • 2 2
    • View Profile
Re: Rotary table makes erratic direction changes...
« Reply #2 on: July 09, 2006, 01:00:21 AM »
That would make sence. I'll check that out , thanks!
Jon
Logged
Pages: 1   Go Up
« previous next »