Hello Guest it is March 28, 2024, 06:52:21 PM

Author Topic: Home routines using Index pulse.  (Read 4271 times)

0 Members and 1 Guest are viewing this topic.

Home routines using Index pulse.
« on: November 14, 2008, 04:26:11 PM »
I have a Homing routine I need some help with.

I want to initiate a Home routine that sends the table(tool) to the axis limit switch (not Home switch) then reverse direction and come off the switch, then HOME(ref) off the first instance of the Index or Marker pulse from the Encoder. This will assure the table returns to a previous Home within .0001".

How or If?

Thanx
Buddy

vmax549

*
Re: Home routines using Index pulse.
« Reply #1 on: January 28, 2009, 10:16:19 PM »
We worked this out on the Mach yahoo forum, might want to do a search over there.

(;-) TP
Re: Home routines using Index pulse.
« Reply #2 on: September 27, 2009, 02:57:51 AM »
This is done easily with a 7474 trigger IC, 2 are needed for a 4 axis system,

Todor

vintageracer

*
Re: Home routines using Index pulse.
« Reply #3 on: January 29, 2010, 02:49:35 PM »
The thread starts at Message #104328.

I'm really interested in this too. My current CNC has steppers with unused encoders so plugging them in would be fairly easy. My planned upgrade in the summer is DC servo's so the positional home would be an added bonus.

Timothy