Oh another thing, hard to say for sure but the pic certainly looks like it has the QC30 spindle like mine. Mine doesnt have a hole through the spindle but some did, if that one does then you could remove the QC nut and use any 30 taper tooling, if it doesnt then you need QC 30 tooling. The QC 30 tooling has a flange dia of 48mm and thickness of 8.76MM, standard Int30 tooling has a dia of 50mm and thickness of 8mm. The thickness is critical so afraid you cant get a Int30 and grind the Dia douwn as its flange is too thin to lock into the nut. Make sure you get all tooling that goes with it if you decide to buy.
Hood