Hello Guest it is March 29, 2024, 11:29:47 AM

Author Topic: mach2mill and mastercam v9  (Read 3523 times)

0 Members and 1 Guest are viewing this topic.

mach2mill and mastercam v9
« on: November 10, 2008, 07:32:13 PM »
Hello I´m new in this world of cnc, I need the name of the post processor and editor for my mastercam could work with my mach2mill.
Thanks
Bruno Meola

Offline Graham Waterworth

*
  • *
  •  2,668 2,668
  • Yorkshire Dales, England
    • View Profile
Re: mach2mill and mastercam v9
« Reply #1 on: November 11, 2008, 09:22:00 AM »
Try using the Fanuc 6 post or use this one :-

http://www.machsupport.com/posts/Mastercam_mach3b.zip

Graham
Without engineers the world stops