Hello Guest it is December 02, 2024, 03:31:29 PM

Author Topic: SS & MACH V3.042.012  (Read 8408 times)

0 Members and 1 Guest are viewing this topic.

Offline RICH

*
  • *
  •  7,427 7,427
SS & MACH V3.042.012
« on: October 06, 2008, 08:56:17 PM »
Things seem to be looking up with the latest Mach test version and SS plug-in.
Threading seems to be working well and they also took care of us users with the punny lathes.
So if your spindle slows down due to cutting, fear not, the z axis adjusts accordingly.
Did notice that the DRO didn't show the slow down in speed ( may be a Mach setting ).

The DRO rpm is working great. I use a single slotted disc, and before the readout wouldn't go over
200 RPM. Never made it wider and now with the latest version reads 1-1300 rpm within +- 2 rpm.

Good job.  :)

Now if you get the backlash working with the SS life will realy be good. ;D

I know, some people are never happy!
 ::)RICH