Machsupport Forum
Third party software and hardware support forums. => SmoothStepper USB => Topic started by: RICH on October 06, 2008, 08:56:17 PM
-
Things seem to be looking up with the latest Mach test version and SS plug-in.
Threading seems to be working well and they also took care of us users with the punny lathes.
So if your spindle slows down due to cutting, fear not, the z axis adjusts accordingly.
Did notice that the DRO didn't show the slow down in speed ( may be a Mach setting ).
The DRO rpm is working great. I use a single slotted disc, and before the readout wouldn't go over
200 RPM. Never made it wider and now with the latest version reads 1-1300 rpm within +- 2 rpm.
Good job. :)
Now if you get the backlash working with the SS life will realy be good. ;D
I know, some people are never happy!
::)RICH