Hello Guest it is December 11, 2019, 10:01:27 PM

Author Topic: Help with Write Wizard  (Read 2369 times)

0 Members and 1 Guest are viewing this topic.

Help with Write Wizard
« on: June 14, 2006, 02:30:33 PM »
I can do one line text okay but how do I get 2 lines
 I now there is a way to do it using a sub program but I don't now very much about writing  code

Thanks Dick
Re: Help with Write Wizard
« Reply #1 on: June 15, 2006, 07:00:58 AM »
The Write wizard will only do one like at a time :( I would run the Write wizard a few times, then use copy and past to get the gcode into one file.
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com

Offline Graham Waterworth

*
  • *
  •  1,922 1,922
  • Yorkshire Dales, England
    • View Profile
Re: Help with Write Wizard
« Reply #2 on: June 15, 2006, 02:09:56 PM »
Hi,

if you want lots of text have a look at this working demo, it outputs G-Code.

http://members.aol.com/m9685123/Mdemo.htm

Graham.
Without engineers the world stops