Hello Guest it is March 28, 2024, 01:20:45 PM

Author Topic: x and y axis not working properly....PPPPPLLLLLEEEEAAASSSSSEEEEE help!  (Read 6264 times)

0 Members and 1 Guest are viewing this topic.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: x and y axis not working properly....PPPPPLLLLLEEEEAAASSSSSEEEEE help!
« Reply #10 on: September 23, 2008, 12:57:09 PM »
Bit confused as where you measured, was it at the drive?
If it was then looks like its either a drive or motor problem, try swapping the drives around and see if the problem follows the drive.
Hood
Re: x and y axis not working properly....PPPPPLLLLLEEEEAAASSSSSEEEEE help!
« Reply #11 on: October 01, 2008, 08:22:46 AM »
hi hood.
yes the problem followed the drive.   i took the drive apart and cleaned all the dust out of it and now it works fine.  i work in a wet environment so i think some moisture was getting into the drive.  combine the moisture and the dust and i think it was shorting out.

thanks for the help!!!

dave

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: x and y axis not working properly....PPPPPLLLLLEEEEAAASSSSSEEEEE help!
« Reply #12 on: October 01, 2008, 03:51:18 PM »
excellent news :)

Hood