Hello Guest it is March 28, 2024, 01:56:15 PM

Author Topic: another tool change question , g32 g25 g28 ???  (Read 10916 times)

0 Members and 1 Guest are viewing this topic.

Re: another tool change question , g32 g25 g28 ???
« Reply #10 on: September 09, 2008, 11:09:24 PM »
Hmmmmm Strange. G53 is absolute Machine Coords. Should go to machine 0.00 unless there is a "Home Off" entry in the homing settings.
RC
Re: another tool change question , g32 g25 g28 ???
« Reply #11 on: September 09, 2008, 11:13:14 PM »
well that should do exactly what we are after then , will give it another whirl in the morning

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: another tool change question , g32 g25 g28 ???
« Reply #12 on: September 09, 2008, 11:13:52 PM »
Richard, typo in that script too. At the bottom wher it has    Code "G00 G54 Z" & ChangeZ   should be   Code "G00 G53 Z" & ChangeZ


It should RC. Depending on the version of Mach your runinng. The bleeding edge version will appreciate a sleep(*) rather than the while (is moveing) wend


Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!

Offline Kristin D

*
  •  203 203
  • Take that you LazyCam, next stop the glue factory!
    • View Profile
Re: another tool change question , g32 g25 g28 ???
« Reply #13 on: September 10, 2008, 04:56:16 PM »
Richard, typo in that script too. At the bottom wher it has Code "G00 G54 Z" & ChangeZ should be Code "G00 G53 Z" & ChangeZ


It should RC. Depending on the version of Mach your runinng. The bleeding edge version will appreciate a sleep(*) rather than the while (is moveing) wend


Brett

Brett,

Have you been watching the video of the M11-180 UPPER RECEIVER in action on thompsonmachine.net? Would seem so with the Chip with a Glock Avitar!
 :o

Kristin

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: another tool change question , g32 g25 g28 ???
« Reply #14 on: September 10, 2008, 07:06:51 PM »
Why yes I have Kristin. That is one step above a guard dog.  ;D  I got to get me one of those.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: another tool change question , g32 g25 g28 ???
« Reply #15 on: September 10, 2008, 08:02:42 PM »
Thats been one of my favorite things I have built , If you search my username panaceabeachbum on youtube you can see some of the other machine guns I have built


We couldnt quite get the macro working but did set the param in the g28 settings box and a quick g49 g28 callout right above the m6t** line seems to be working just fine .
Re: another tool change question , g32 g25 g28 ???
« Reply #16 on: September 10, 2008, 08:16:57 PM »
RT,
Sure would like to see a working scale model of the Phalanx.....like the one I have as my avatar.
I once thought about making one in 22LR but never got very far with it.
RC
Re: another tool change question , g32 g25 g28 ???
« Reply #17 on: September 10, 2008, 08:46:22 PM »
I have some pics somewhere of one a fellow was building a couple of years ago in 22lr , delinker and all . I got to handle it at the knob creek machine gun shoot , very impressive.
Re: another tool change question , g32 g25 g28 ???
« Reply #18 on: September 10, 2008, 09:13:33 PM »
HOT DANG ! I'm anxious to see what you can find !
Off forum if you'd like.
Thanks,
RC