Hello Guest it is March 29, 2024, 07:41:09 AM

Author Topic: VFD and noise questions  (Read 17800 times)

0 Members and 1 Guest are viewing this topic.

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: VFD and noise questions
« Reply #30 on: September 01, 2008, 11:08:05 PM »
 :)

The two biggest settings were your max speed in config, spindle pulley and the velocity in config., motor tuning, spindle.

Glad your sorted.

Brett
« Last Edit: September 01, 2008, 11:10:43 PM by Chaoticone »
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: VFD and noise questions
« Reply #31 on: September 01, 2008, 11:15:53 PM »
So what was causing the E-stop???

Regards,
Ray L.
Regards,
Ray L.

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: VFD and noise questions
« Reply #32 on: September 02, 2008, 07:14:05 AM »
Quote
So what was causing the E-stop???

A conflict in the settings mentioned below and commanded spindle speed was causing the watchdor trigger. That is what was causing the e-stop.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: VFD and noise questions
« Reply #33 on: September 04, 2008, 04:46:15 PM »
Thanks for info about REF ALL HOME. I still can't seem to get back to making parts. I had the machine running today to tweak it in and after about 20 cycles the Y axis just quit. The DRO continued to run for Y but no movement. Can't even get it to go with the jog function. I have shut the drive down still nothing. Is there some kind of error log that might indicate what happened? I will restart Mach 3 and see what happens. I don't have the Sola on the drive supply yet.

B.E.N.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: VFD and noise questions
« Reply #34 on: September 04, 2008, 04:54:56 PM »
B.E.N.
Please reply in this thread , your posts have been split out to a thread of its own as it was off topic for this thread and also you are likely to get more views.

http://www.machsupport.com/forum/index.php/topic,8226.0.html

Hood