POST #1 - MILLING MACHINE
Here are some pictures of parts for a 1/12 scale model of a milling machinie. There are over 50 pieces to made
many of which are threading, taper turning, crowned pulleys, etc. Will CNC as much as possible utiliziing Lazcam, the Wizards,
etc to produce the gcode for as many parts as possible. Of course some manual coding also.You just can't beat CNC when duplication comes into play. The little three ball handles can be a pain in the neck even when all the cutters are already made but not so with CNC. So until the model is done you just get to look at some of the parts.
Other model work which is complete can be seen in POST#2 to 4 in this thread.
RICH