Hello
Guest
it is
April 25, 2024, 10:20:11 AM
Guest
Login
Register
Menu
Home
Help
Search
Calendar
Members
Members
View the memberlist
Search For Members
Login
Register
YouTube
Machsupport Forum
/
G-Code, CAD, and CAM
/
LazyCam (Beta)
/
Plasma kerf width in Lcam
« previous
next »
Print
Pages:
1
Go Down
Author
Topic: Plasma kerf width in Lcam (Read 3878 times)
0 Members and 1 Guest are viewing this topic.
kevoler
7
Plasma kerf width in Lcam
«
on:
August 02, 2008, 10:31:38 PM »
Can anyone tell me how to set the plasma kerf width in Lcam. If Lcam doesn't have that can it be done in Mach3?
Logged
Overloaded
4,922
Re: Plasma kerf width in Lcam
«
Reply #1 on:
August 02, 2008, 10:39:56 PM »
In LCam Plasma, you can set up a tool dia. the same as the width of your kerf then offset to the inside or outside...whichever you like.
Never tried it...but it looks like it would work.
RC
Logged
alex718
32
Re: Plasma kerf width in Lcam
«
Reply #2 on:
September 11, 2008, 02:05:26 PM »
I have LC Ver 2.58 and I cannot find where I would enter kerf information. Can you please help me find it ?
Thanks, Alex
Logged
Overloaded
4,922
Re: Plasma kerf width in Lcam
«
Reply #3 on:
September 11, 2008, 03:20:17 PM »
I jus create a tool, call it what you like, enter the kerf width as tool diameter and offset in or out as normal.
Works in simulation, I dont have a torch table.
RC
Logged
Print
Pages:
1
Go Up
« previous
next »