Hello Guest it is May 06, 2021, 12:17:13 AM

Author Topic: Roughing tool path  (Read 2430 times)

0 Members and 1 Guest are viewing this topic.

Roughing tool path
« on: May 27, 2006, 11:01:44 AM »
Hello Brian
When importing a DXF drawing from autocad into mach3 turn is it possible to create a roughing tool path in mach3 or has this got to be added at the time of drawing.
cheers Gary
Re: Roughing tool path
« Reply #1 on: May 27, 2006, 11:17:28 AM »
Not at this time :( ...
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com