Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: gary on May 27, 2006, 11:01:44 AM

Title: Roughing tool path
Post by: gary on May 27, 2006, 11:01:44 AM

Hello Brian
When importing a DXF drawing from autocad into mach3 turn is it possible to create a roughing tool path in mach3 or has this got to be added at the time of drawing.
cheers Gary

Title: Re: Roughing tool path
Post by: Brian Barker on May 27, 2006, 11:17:28 AM

Not at this time :( ...