Hello Guest it is April 22, 2021, 02:01:04 PM

Author Topic: G28.1 Z.500 (TOM) routine NOW works with G68 coord rotation in V.067  (Read 2014 times)

0 Members and 1 Guest are viewing this topic.

Offline BR549

*
  •  6,952 6,952
    • View Profile
Not sure IF any one noticed BUT the G28.1 Z.500 routine will NOW run with G68 active.   I found it by accident today testing some old code on the latest dev version.

Thanks Brian and Company (;-),

 (;-) TP

Re: G28.1 Z.500 (TOM) routine NOW works with G68 coord rotation in V.067
« Reply #1 on: November 27, 2012, 10:34:18 PM »
I guess it is time to do an update!

Steve

Thanks TP for finding this
Re: G28.1 Z.500 (TOM) routine NOW works with G68 coord rotation in V.067
« Reply #2 on: February 20, 2013, 09:21:59 PM »
Are you running 067 on a daily basis?  066 is lock down.  If 067 is still in development, I don't want to turn it loose on my customers.

Offline BR549

*
  •  6,952 6,952
    • View Profile
Re: G28.1 Z.500 (TOM) routine NOW works with G68 coord rotation in V.067
« Reply #3 on: February 20, 2013, 10:12:39 PM »
Yes Richard I have. CandCNC switched over a while back to Ver.067 to gain all the improvements they needed for their latest release. It has been working fine here.

(;-) TP
Re: G28.1 Z.500 (TOM) routine NOW works with G68 coord rotation in V.067
« Reply #4 on: March 10, 2013, 02:47:30 PM »
After some testing, I found a fairly serious issue in .067.  When cutting a large file with lots of parts, mach will skip over some of the parts.  The G-code is fine.  I load the same file on a machine running .022 and it runs fine.  When I re-load on .067, it fails.  Tried different PC's and different machines with the same results.  The failure point is random.  Every now and then it will just skip a part.  The TOM routine runs, torch fires, torch shuts off, raises and moves to next part....almost as if the linear feed code is just missing.