Hello Guest it is March 28, 2024, 10:40:05 PM

Author Topic: The start of Mach Blue Lathe for those that requested a Lathe Set  (Read 15644 times)

0 Members and 1 Guest are viewing this topic.

Online Graham Waterworth

*
  • *
  •  2,668 2,668
  • Yorkshire Dales, England
    • View Profile
Re: The start of Mach Blue Lathe for those that requested a Lathe Set
« Reply #10 on: May 07, 2006, 09:39:25 AM »
Its here,
Graham.
Without engineers the world stops
Re: The start of Mach Blue Lathe for those that requested a Lathe Set
« Reply #11 on: May 07, 2006, 09:44:33 AM »
Thanks guys.

As you can tell I'm not familiar with the lathe stuff.
In fact the first time I even looked at the lathe module, was when Santini suggested we do our "Blue" theme for it.

Thanks again.  This clears things up.

Offline Bloy

*
  •  158 158
    • View Profile
Re: The start of Mach Blue Lathe for those that requested a Lathe Set
« Reply #12 on: May 08, 2006, 05:33:39 AM »
Hi Mr Bean,
  In the configs/turn options there is an option for radius or diameter mode...

Is this what you are looking for?

I'm sorry MrBean, I left out a key (ports and pins) part of the path.   Gee good thing there are others make up for my missing marbles.   :)
Re: The start of Mach Blue Lathe for those that requested a Lathe Set
« Reply #13 on: May 08, 2006, 07:25:28 AM »
No problem.  We all have missing marbles at times.

I think we've found all the "Dynamic" labels now and sorted these out.

Cheers.
Re: The start of Mach Blue Lathe for those that requested a Lathe Set
« Reply #14 on: May 09, 2006, 06:42:45 PM »
For anyone interested the screenset is open for download and test :-

http://machsupport.com/forum/index.php?topic=632.new#new


Thanks for the original feedback. The static labels caught us both out :)