Hello Guest it is March 29, 2024, 06:47:48 AM

Author Topic: Jog HotKey gets stucked!  (Read 8938 times)

0 Members and 1 Guest are viewing this topic.

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: Jog HotKey gets stucked!
« Reply #10 on: February 25, 2008, 09:05:35 PM »
Hi, Gilbert

Maybe you can use a brains similar to this one, Haven't looked at your screen set at this time, But I will   

http://www.machsupport.com/forum/index.php/topic,4897.0.html

Just a Thought, Chip
Re: Jog HotKey gets stucked!
« Reply #11 on: February 25, 2008, 11:56:26 PM »
Hi Bodini

So the problem appeared at random times in your system ?

Gilbert.

Re: Jog HotKey gets stucked!
« Reply #12 on: February 25, 2008, 11:59:39 PM »
Hi Chip

Sure I will take a shot at it.

Thanks!

Gilbert.

Offline Bodini

*
  •  216 216
    • View Profile
Re: Jog HotKey gets stucked!
« Reply #13 on: February 26, 2008, 12:26:09 AM »
So the problem appeared at random times in your system ?

Yeah.  I'd be jogging along and let go, and the jogging axis would just keep going.    It happened to other people at my machine too.  Like I said, I never figured it out and it hasnt happened in probably 6 months.  One thing I always suspected is that by pushing the shift key, then the arrow key to jog, and then letting go of the shift key (and then releasing the arrow key) might have done it.

-Nick

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: Jog HotKey gets stucked!
« Reply #14 on: February 26, 2008, 12:38:17 AM »
Hi, Gilbert

List the button text with button description, I'll work on it a bit hear.

Thanks, Chip
Re: Jog HotKey gets stucked!
« Reply #15 on: February 27, 2008, 02:45:07 PM »
Hi Chip

Sorry for the delay!

I hope this is the info you need:

The buttons I'm  talking about are located in the right upper corner of
page1 of the scrren i attached to a earlier post on this thread.

The Captions are X-FB++,X-FB--,Y-FB++,Y-FB--.

They have the corresponding hot keys from the numeric keypad assigned.

And they are supposed to jog axis X+A simultaneously and Y+B in the same fashion.

Thanks again!

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Jog HotKey gets stucked!
« Reply #16 on: February 27, 2008, 03:28:25 PM »
Sorry I missed this earlier where you posted your screen set, just looked at it now and it is OEM codes, I had thought maybe it was VB buttons. I however cant get it to Jog as it says there is a VB Failure so looks like you need additional script for this which I dont have.
 Not sure how USB pendants work but if you can set the button up as an OEM trigger then you could asign the Jog buttons OEM to that trigger.

Hood
Re: Jog HotKey gets stucked!
« Reply #17 on: December 27, 2016, 09:32:41 AM »
I am sure this is a elemetry question but what do you mean by "FB"?

I am attempting to set the jog codes per the above "ScreenHunter_03_Feb... but can not determine how to get the same codes.

(The Captions are X-FB++,X-FB--,Y-FB++,Y-FB--)

Thank you.

BretC