Why is it that if I FeedHold and than Cyle Start this program, it does not stay on the toolpath. (Mach3 ver 2.63)
The program is:
G90 G64 G80 G17 G21 G40 G49 G50 G94
G68 R45
G0 x132.00000 y0.00000
M4
M1
M3
G1 x132.00000 y-5.00000
G1 x0.00000 y-5.00000
G1 x0.00000 y-137.00000
G1 x132.00000 y-137.00000
G1 x132.00000 y-5.00000
M5
M0
M30
It only happens after the first g1 move and only when using G68.
Thanks,
Szilard.