Hello Guest it is March 19, 2024, 06:11:15 AM

Author Topic: Mach 3 lathe post for Bob-Cad v22  (Read 5612 times)

0 Members and 1 Guest are viewing this topic.

Mach 3 lathe post for Bob-Cad v22
« on: January 25, 2008, 04:48:14 PM »
Is there anybody out there in the whole world using a post processor in Bob_Cad lathe v22???? I have downloaded the mach 3 lathe post from Bobcad but it doesn't generate useable g code. I thought I would ask here if anybody out there is running this software and if they have either had a post written or come across one that works. The only cutting I have done in mach 3 is using the wizards, they work, I just wish I could use my drawings in Bob- Cad to generate some usable code. Help!!!!!!!!!!!!! :o :'(
« Last Edit: February 01, 2008, 09:11:56 PM by Chip »

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: Mach 3 lathe post for Bob-Cad v22
« Reply #1 on: January 25, 2008, 07:08:15 PM »
Hi, SnakeRiver

I have Ver. 22, Been working with it some in lathe mode, What Build ## are you using, Look under Help, About BobCad....

There are some issues for sure.

I'll send you a PM, You'll find it at the top of this screen, Messages or click on your user name.

Thanks, Chip
« Last Edit: January 25, 2008, 07:22:58 PM by Chip »
Re: Mach 3 lathe post for Bob-Cad v22
« Reply #2 on: January 26, 2008, 08:36:29 AM »
Chip here is the dxf file we talked about.

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: Mach 3 lathe post for Bob-Cad v22
« Reply #3 on: January 26, 2008, 01:29:13 PM »
Hi, SnakeRiver

Latest BobCad post for Mach3 Turn working hear, Hears a Pic.3" x 0,625" & G-code to try.

Talked with BobCad teck. support on the other issues we discussed.

Hope this Helps, Chip
« Last Edit: January 27, 2008, 12:07:58 AM by Chip »

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: Mach 3 lathe post for Bob-Cad v22
« Reply #4 on: January 28, 2008, 10:41:46 PM »
Hi, John

Did you make any progress.

Thanks, Chip
Re: Mach 3 lathe post for Bob-Cad v22
« Reply #5 on: February 02, 2008, 03:27:24 PM »
 ;D Can't thank you enough Chip. I was starting to wonder if mabey all this CNC stuff was beyond my comprehending it. You have been a great source of help and My goto enforcer( junk yard dog) with Bob-cad tech support. I'm glad your on that task cause they just brush me off as a newby dummy. Ha Ha. Looking forward to getting after it again monday. I'll post some pics of the parts I'm now sucessfully making.