Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: SnakeRiver on January 25, 2008, 04:48:14 PM
-
Is there anybody out there in the whole world using a post processor in Bob_Cad lathe v22???? I have downloaded the mach 3 lathe post from Bobcad but it doesn't generate useable g code. I thought I would ask here if anybody out there is running this software and if they have either had a post written or come across one that works. The only cutting I have done in mach 3 is using the wizards, they work, I just wish I could use my drawings in Bob- Cad to generate some usable code. Help!!!!!!!!!!!!! :o :'(
-
Hi, SnakeRiver
I have Ver. 22, Been working with it some in lathe mode, What Build ## are you using, Look under Help, About BobCad....
There are some issues for sure.
I'll send you a PM, You'll find it at the top of this screen, Messages or click on your user name.
Thanks, Chip
-
Chip here is the dxf file we talked about.
-
Hi, SnakeRiver
Latest BobCad post for Mach3 Turn working hear, Hears a Pic.3" x 0,625" & G-code to try.
Talked with BobCad teck. support on the other issues we discussed.
Hope this Helps, Chip
-
Hi, John
Did you make any progress.
Thanks, Chip
-
;D Can't thank you enough Chip. I was starting to wonder if mabey all this CNC stuff was beyond my comprehending it. You have been a great source of help and My goto enforcer( junk yard dog) with Bob-cad tech support. I'm glad your on that task cause they just brush me off as a newby dummy. Ha Ha. Looking forward to getting after it again monday. I'll post some pics of the parts I'm now sucessfully making.