Hi to all, I've just installed Super PID on my CNC router, which is controlled by Mach3 (via printer port #2, since port #1 is totally occupied by the Rutex servo drives) and while on the fly, i decided to also throw in an encoder for fine positioning and also 6 push button switches to activate Start, stop etc (also connected via printer port #2). So far the PID and positioning encoder are working as expected, however I cannot get to set the OEM triggers to communicate through pins 2 to 7 (of Print Port 2). Now.... I know that pins 2 to 9 are originally outputs, however in the "Ports and Pins" - "Port Setup" I set the outputs of port 2 to inputs. Further more in the "Input Signals" it says that only pins 10-13 and 15 are inputs, which is probably the source of my difficulty. I have also tried going around it through the Keygrabber but to no avail. I am a bit confused how or from where to get these set. Does any of you guys have any idea how to go about this? thanks
Marting