Hello Guest it is March 28, 2024, 06:12:00 PM

Author Topic: Speed control  (Read 3416 times)

0 Members and 1 Guest are viewing this topic.

Speed control
« on: December 30, 2007, 10:24:57 AM »
Hi all,

Is there a code in Mach3 to clamp the max spindle speed when in CSS on a lathe?.

best regards

Jim

Offline Graham Waterworth

*
  • *
  •  2,668 2,668
  • Yorkshire Dales, England
    • View Profile
Re: Speed control
« Reply #1 on: December 30, 2007, 01:56:13 PM »
I have never found one, G50 S1000 is the normal format but G50 is scaling on Mach turn.

Graham.
Without engineers the world stops
Re: Speed control
« Reply #2 on: December 30, 2007, 04:29:46 PM »
Yes I guess it's going to be a macro job with a G or M prefix, I don't really want to strap the control down as some of my jobs are only 4mm to start with, hi.

Did you have a good Christmas?, I keep meaning to ring you about your Emco toolchanger macro, but when your up to your eyes in alligators............well you know.

Thanks for the reply,

Jim.