Hello Guest it is August 20, 2019, 10:44:30 AM

Author Topic: Post Processor  (Read 7352 times)

0 Members and 1 Guest are viewing this topic.

Re: Post Processor
« Reply #10 on: May 22, 2006, 08:39:45 AM »
becikeja,
make sure you load the Mach III program and then deleate the two programs. DO NOT DELEATE THEM FROM THE CD ROM. Wanted to make that clear.

Ben
Re: Post Processor
« Reply #11 on: May 27, 2006, 11:10:24 PM »
BobCAD has all their posts available for download at:

http://www.bobcad.com/index.phpselect_page=posts_index&start=/home/bobadmin/public_html/posts/Mach2_and_3&parent=/home/bobadmin/public_html/posts

This link is specifically the Mach X Posts.

However I'm having trouble with the Mach2 post crashing BobCAD.
Does anyone have any thoughts?
« Last Edit: May 27, 2006, 11:12:38 PM by bpmufx »
Re: Post Processor
« Reply #12 on: May 28, 2006, 09:10:18 AM »
Appreciate everyones help.  I downloaded the Mach 3 mill BobCad post processor.