Hello Guest it is March 29, 2024, 07:14:15 AM

Author Topic: Cameo  (Read 4849 times)

0 Members and 1 Guest are viewing this topic.

Cameo
« on: December 05, 2007, 05:38:47 AM »
Trying to impress SWMBO, I used a picture I had taken of her a few years ago and imported it into LazyCam as a jpg. I set the maximum depth of cut to about 90 per cent of the thickness of the Perspex material and using a hand ground 60 degree engraving cutter, let Mach do it's magic. The size is about 60 x 60 x 3 mm. She has it displayed so visitors can see it, so I guess she was quite pleased. The pictures are of the original photo, a backlit one and a sidelit one to show the machineing marks.

Ian

Offline zarzul

*
  •  232 232
  • Wyoming, USA
    • View Profile
Re: Cameo
« Reply #1 on: December 05, 2007, 11:05:20 AM »
Nice work,  that gives all of us some new ideas to try.

Arnie