Mach4 version 4.2.0.5036
The problem is simple.
1- Open a new Facing Cycle.
2- Enter Xi:10, Zi:0, Xf:0, Zf:-1
3- Tap View Toolpath.
4- Run the code.
5- Machine crashes.
The problem is Mach4 adds an extra 10mm to the Z+ position value. And the carriage or the tool hits the tailstock and/or the live center.
N0095 G00 X0.1000 Z10.2000 (Positioning for Start of Cycle)
NOTE: The one or two earlier version of Mach4 hadn't this bug.
Guest
