Hello everyone,
I would like to share my new WHB04B solution for Mach4 and MachPro.
The project includes:
•   WHB04B-4 and WHB04B-6 support
•   HID to TCP Bridge
•   Step and Continuous Jog modes
•   MPG support
•   Cycle Start, Feed Hold, Stop and Reset
•   Spindle control
•   HWID licensing system
•   And much more
•   Windows 10 and Windows 11 support
Installation Videos:
Mach4 + MachPro:
https://youtu.be/VhU7JDeXLFo
Mach4:
https://youtu.be/OceMDKB33-c
MachPro:
https://youtu.be/gmYY4G-VAhM
ConfigUI:
https://youtu.be/f42EDeMtrzE
A free 7-day trial license is available on request.
Feedback is welcome.
Regards,
Sergio Couto
E_CNC
e_cnc@outlook.com

📥 Download My Software (ZIP): https://bit.ly/4fP6nDV

 New link to make downloading easier: https://drive.google.com/file/d/1r3u3rXEg2nOlWXB8EquU1TW9g3JiauZO/view?usp=sharing

English will not stay selected. Everytime I select English, it will revert back to portuguese. Nowhere can I find a price for purchase. One thing I'm looking for, is the state of the pendant needs to follow the state of the jog buttons on MachPro. Everytime I start MachPro or Mach4, my pendant is in STP mode instead of CONS mode. This has bit me multiple times when setting up a job.

Hello Colten Edwards,

First of all, I would like to thank you for getting in touch.

Regarding your questions, for the Bridge to start working, you need to send me an email at e_cnc@outlook.com with the HWID code, as shown in the first video. Once I receive it, I will send you a 7-day trial license along with the price for the permanent license. If the software does not have a valid license, nothing will work.

Regarding changing the language to English, please follow this link:
https://drive.google.com/file/d/1TySGIGdOLSj1W2WJzeyd7abMnRkXtDcg/view?usp=sharing

Another important point: the Jog Rate in MachPro cannot be configured because I do not have access to its API.

I would also like to inform you that the Step mode works in pure incremental mode. It is not recommended for moving long distances; for that purpose, the Continuous mode should be used instead.

Please remember that this is not a plugin, but rather an independent software application that works alongside Mach4/MachPro.

I also read your comment:

«"This has already caused me problems several times when setting up a job."»

It would be impossible for this system to have caused you any problems, because without a valid license it simply does not function at all.

Please take a look at the videos posted above or the installation manual located in the Docs folder within the software package to clarify any doubts you may have.

If you have any further questions, please do not hesitate to contact me here in the comments. Also, please send me your HWID code so that I can provide you with a free trial license.

Thank you very much.

📄 Installation Manual

The complete installation manual is now available for download.
Link: https://drive.google.com/file/d/1wDk9DQd4rW2orXpwlhHo1mYhyDJU_0fT/view?usp=sharing
Before requesting support, please read the manual carefully, as it explains:

- Software installation
- License activation
- Mach4 setup
- MachPro setup
- Troubleshooting
- Final testing procedures

Most installation and configuration issues can be resolved by following the instructions provided in the manual.

Thank you.

Excellent Manual Srato.

I wish you every sucess with your software solution.

Tweakie.

Thank you very much for your feedback  Tweakie.CNC

Hello everyone,

The website is now fully operational, allowing all users to test and evaluate the software. I believe it will be a valuable solution for many operators using the WHB04B-4/6 controller with Mach4 and MachPro, helping to resolve common compatibility and operational issues.

Website:
https://e-cnc.pt

Free 7-Day Trial Download:
https://e-cnc.pt

I would greatly appreciate any comments, suggestions, and feedback from Mach4 users.

Best regards,

Sérgio Couto
E_CNC Software Development