hope to get a little help , xbox controller is working like a charm... have a bunch of button on controller that i would like to program to do spindle power +- any advise would be apricated.

What plugin are you using?

MSI Force GC30V2 got it from amazon. Has a bunch of buttons I would like to assign task. But program does not allow.  Xbox schilling does not have options to program any more to add . works great he triggers that are noton schilling thanks for the help

OK So reading through the shilling manual, you can call macros with button presses.
Make a Macro to turn on/off your spindle  and call it with a button. It all in section 4.6.1.

Hope this helps.
 

I have all the shilling buttons full with task. since shilling was made the newer controllers added buttons . I have done some experimenting with macro and they work well with buttons the are on the setup map. was hoping to set macro for trigger buttons that are not on shilling setup thanks for the help Charlie

do you have any inputs not being used?