Hello Guest it is July 19, 2024, 11:06:13 PM

Author Topic: change (Linuxcnc step/dir-servos) to Mach3 to suit recipient. Obsolete pcb  (Read 1731 times)

0 Members and 1 Guest are viewing this topic.

Offline docslip

*
  •  4 4
  • Retired Dir Engineering, Novax Corp. March 27-2000
It seems that my documentation is lost, I'm too old , and Company who made the p.c.b is no longer around, I think because web site domain is for sale.
The p.c.b is a p.w.m input to analog 0-10 volt output.
Web page silk is screened on board says "www.kdntool.com   DCNC/VFD/OPTO REV1".

If someone has a schematic for this p.c.p could you please email it to me?
With thanks,
Bill Phillips , Surrey Canada
docslip@telus.net
-
I'm giving my converted Grip1340 G ball-screw converted lathe to a friend whom I was unable to convert to linuxcnc. He's a Mach lover.

Attached 1 only photo of the obsolete item described.



Offline Graham Waterworth

*
  • *
  •  2,707 2,707
  • Yorkshire Dales, England
The photo did not upload, can you try again. You can edit the post and add the picture or just do a new post.
Without engineers the world stops

Offline docslip

*
  •  4 4
  • Retired Dir Engineering, Novax Corp. March 27-2000
Thank you Graham , I'll try to upload photo again here.
Bill Phillips
Is this for a DC servo?  It may be simpler and cheaper to replace the amplifier with a DC servo driver.

Arturo Duncan
https://cnc4pc.com