Hello Guest it is June 19, 2024, 06:24:58 AM

Author Topic: Tool Path Window for A and B axis ?  (Read 4170 times)

0 Members and 1 Guest are viewing this topic.

Tool Path Window for A and B axis ?
« on: November 08, 2007, 03:28:26 PM »
Hi:
Does any of you know if its possible using Mach3Screen, to create a tool path screen control that works with A and b or C axis?

Or any other way of doing it?

I need two planes (four motors) x,y and a,b.

Thanks!

Offline Tarak

*
  •  229 229
Re: Tool Path Window for A and B axis ?
« Reply #1 on: November 21, 2007, 10:16:17 PM »
The standard format will work with 4 axis, you need to turn on A axis in the toolpath settings.
But as far as I know B & C axis are not displayed.
Re: Tool Path Window for A and B axis ?
« Reply #2 on: November 25, 2007, 01:13:55 PM »
Thanks DARC for the info!