Hello Guest it is December 05, 2023, 11:53:18 PM

Author Topic: Mach 3 Jog distance  (Read 222 times)

0 Members and 1 Guest are viewing this topic.

Mach 3 Jog distance
« on: March 15, 2023, 05:50:00 AM »
Apologies as I am quite new to Mach 3 coming from a Duet controller.
On the Duet screen I was able to jog the spindle precise amounts i.e. 50mm, 10mm, .5mm and .05mm from the control dashboard. Is this possible with Mach 3.
apologies if this is a very basic question?

Offline Tweakie.CNC

  • *
  •  9,161 9,161
  • Super Kitty
    • View Profile
Re: Mach 3 Jog distance
« Reply #1 on: March 15, 2023, 06:14:15 AM »
Press the TAB key.
On the MPG flyout set the Cycle Jog Step you require. Select STEP in Jog Mode. Use the Jog Buttons to move any axis in increments of the step distance you have set.

« Last Edit: March 15, 2023, 10:19:12 AM by Tweakie.CNC »
Re: Mach 3 Jog distance
« Reply #2 on: March 15, 2023, 10:53:40 AM »
Thank you Tweakie,

I thought there may be fixed selectable options (buttons so to speak).
I will have a play with that later