Hello Guest it is July 17, 2024, 12:24:50 PM

Author Topic: Macro for set all tools offsets in ATC  (Read 10345 times)

0 Members and 1 Guest are viewing this topic.

Macro for set all tools offsets in ATC
« on: January 24, 2023, 05:22:11 PM »
Hi, i looking for a macro for measure all tool offsets in a row (i have 6 tool holders and space for 15 tool holders).

I found this one in youtube but without the macro/script shared and i see its a good script for save time. https://www.youtube.com/watch?v=SLq_s0FQ-SA 

Anyone have something similar or this script?

Thanks for your help.
Re: Macro for set all tools offsets in ATC
« Reply #1 on: January 25, 2023, 04:53:59 AM »
It looks neat but would be better if you didn't have to manually clip a wire on the tool each time.
Re: Macro for set all tools offsets in ATC
« Reply #2 on: January 25, 2023, 06:01:35 AM »
With my touch probe this isn't a problem it's a tool setter "with switch" and i don't need to ground the spindle (but ground spindle isn't a problem).