Hello Guest it is March 28, 2024, 02:37:58 PM

Author Topic: Mach3 display X, Y and Z axis not in real time (time delayed)  (Read 697 times)

0 Members and 1 Guest are viewing this topic.

Mach3 display X, Y and Z axis not in real time (time delayed)
« on: November 15, 2022, 02:23:32 PM »
Hello

Have installed and set up Mach3 on a new computer.
Now I have the problem with the new computers when I move an axis (whether with curser, hand console, etc.) the
the display only adjusts when I release the button (with which I move the axis).

(so I press e.g.: to move the X axis on the arrow key of the keyboard : --> axis moves ---> display does not change---> release the key---> value changes by the driven path )

With my old computers I did not have the problem and find in the settings between old and new PC no difference.

Does anyone have a tip for me what could be set wrong?

mfg Erich
Re: Mach3 display X, Y and Z axis not in real time (time delayed)
« Reply #1 on: November 16, 2022, 11:34:29 AM »
works again after 5 reinstall Mach3