Hello Guest it is May 28, 2024, 04:45:11 PM

Author Topic: 3D probe  (Read 4868 times)

0 Members and 1 Guest are viewing this topic.

3D probe
« on: November 10, 2022, 12:34:48 PM »
Hi all, the 3D probe shown in the attached photo is being sold on the web by several vendors, ranging from AliExpress through eBay to CNC system sellers.  It looks quite nice, having only a 6mm shank and being quite short so good for machines with limited daylight.

Does anyone have any experience with these they could share please?
Re: 3D probe
« Reply #1 on: November 14, 2022, 03:40:41 AM »
Good feedback on the mycncuk forum so I've ordered one.
Re: 3D probe
« Reply #2 on: November 14, 2022, 05:24:36 AM »
 Hi John,
  I have one similar to that one I got from https://topcom.cz/products/dig3d/dig3dlpm/
 Depending on how your probe input works you will need either a NPN or a PNP type. they work very well.
Regards
Charlie M.
Re: 3D probe
« Reply #3 on: November 14, 2022, 11:24:26 AM »
Thanks Charlie, here's hoping.