Hello, I bought an icon integra card with arc pro for a plasma table, with mach 4.
My table is equipped with an anti-collision support on the P11input1 input which will be used for the PROBE and I would like to be able to use the same input to block the machine in the event of contact outside the PROBE. (during JOG and cut)
I can attach my Mach 4 setup if you want. Thanks in advance Laurent.

Hello Laurent,

We aren't currently supporting this feature, but it is on the list of features to add in the future. We recommend properly configuring your Tip Voltage Anti-Dive as well as Minimum Cut Height in the ArcPRO settings table to prevent collisions with the material.