Hello Guest it is May 02, 2025, 04:38:46 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Linear Scale RS 422  (Read 7935 times)

0 Members and 1 Guest are viewing this topic.

Offline Toecutter

*
  • 23 23
Linear Scale RS 422
« on: September 19, 2022, 06:42:46 AM »
Hello,
I need linear scales for the IP/A, do I need the RS 422 assignment for this? As far as I can see, only RS 422 has A B I and A- B- I - all others only have A B I.
Thanks
Greetings René
Logged

Offline Toecutter

*
  • 23 23
Re: Linear Scale RS 422
« Reply #1 on: September 28, 2022, 01:38:00 PM »
OK. Only RS422 work with the IPA
Logged

Offline Toecutter

*
  • 23 23
Re: Linear Scale RS 422
« Reply #2 on: September 28, 2022, 01:51:16 PM »
Hello,
can it be that the IP/A only works with connected encoders or linear scales? If I only connect the servos with the analog signal, the motors don't move and I get a speed error message in the Simcnc software.
Greetings René
Logged

Offline Graham Waterworth

*
  • *
  • 2,779 2,779
  • Yorkshire Dales, England
Re: Linear Scale RS 422
« Reply #3 on: September 28, 2022, 07:42:54 PM »
Hi rene,

this forum is for Mach3 and Mach4 controlled machines, Simcnc is a CS-Labs product so no support here.
Logged
Without engineers the world stops
Pages: 1   Go Up
« previous next »